Step 1: Small holes are drilled through to beneath the slab.

STEP 1

Small holes are drilled through to beneath the slab.

Step 2: A multi-component structural resin is injected. It expands immediately filling voids and compacting the substrate.

STEP 2

A multi-component structural resin is injected. It expands immediately filling voids and compacting the substrate.
Step 3: Guided by laser, continued injection raises the slab as required.

STEP 3

Guided by laser, continued injection raises the slab as required.
Step 4: Just 30 minutes later, the area is trafficable again.

STEP 4

Just 30 minutes later, the area is trafficable again.

With unique, expanding resin technology, URETEK corrects buildings, road slabs and other
on-ground structures.

The URETEK Method is arguably the most efficient, fast and reliable technology in the world for this work.

We drill 6 or 16 mm holes every 1.2 metres or so and inject multi-component structural resins. These mix, expanding immediately, filling voids, compacting the substrate and providing re-support to the structure. Faint movement shown on monitoring devices indicates when full support has been achieved.

If lifting is required, injection is continued, under laser guidance, until correct levels are reached.

There is minimal interruption to clients’ activities and areas are fully trafficable again in 30 minutes!

  • FAST

  • CONVENIENT

  • LONG-LASTING

  • ECONOMICAL