Railway Bridges & Platforms
|
The 129 tonne locomotive was placed above the injection points to maximise ground compaction.
Re-levelling railways, level crossings, hardstands, buildings and platforms.
32 page booklet re full range of Uretek Ground Engineering services.
Uretek raises, relevels and resupports railway train track, rail bridges, level crossings, parking areas, railway platforms etc.
Uretek unique and patented expanding structural resins are injected into foundation ground to raise, resupport, relevel and correct these on-ground structures.
Heavy loads are an advantage when Uretek relevels railway bridges, platforms etc
The greatest possible load applied to the foundation ground enables Uretek to strengthen it with the greatest possible compaction.
In our first photo above the live load of a stationary 129 tonne locomotive enabled maximum compaction of the sub-grade, as Uretek resupported, strengthened and raised the railway bridge at Bredalbane, NSW.
Uretek is the fast answer to re levelling railway bridges and platforms
Uretek resins can be injected quite fast and gain maximum strength rapidly. A typical platform relevelling job will take just a matter of hours. If necssary traffic can flow over the corrected area just 30 minutes after Uretek injection is completed.
Uretek ihas considerable experience in re-levelling railway bridges and platforms
Uretek has lifted, resupported and strengthened many types of railway structures - from railway bridges, tunnel track-slabs and level crossing areas, to weigh-bridges and hard-stands, to platforms and railways buildings.
Uretek Ground Engineering
Uretek solves many problems by unique and patented systems of resin injection.
Fast, economical, long-lasting, environmental and with minimal disruption.