Factory and Warehouse Floor Repair

Uretek Relevels and Resupports

As in this Sydney printery, After new, heavier machinery is installed Uretek is used to increase the bearing capacity of the foundation ground.

Uretek Relevels and Resupports

Uretek raised this motor car workshop floor to remove excessive falls while maintaining adequate drainage.

Uretek Relevels and Resupports

Hardware store concrete floors relevelled quickly using 3 injection hoses.

Uretek Relevels and Resupports

As the warehouse floor was returned to level, the racking squared up back to its correct alignments.

Click to download Industrial Projects

Industrial Projects

Uretek remediation of industrial foundation problems in Australia

Download PDF (1.28 MB).

Click to download Uretek General Booklet

Uretek General Booklet

32 page booklet re full range of Uretek Ground Engineering services.

Download PDF (1.95 MB).

Play Video

Factory & warehouse floors and machinery bases raised, relevelled & re-supported fast and economically... with minimal interruption!

Injecting structural expanding resins into the foundation ground, Uretek Ground Engineering relevels concrete floors by resupporting, raising and releveling - very quickly, economically and with very little interruption to your business.

Uretek factory and warehouse concrete floor re-levelling is fast!

Most factory and warehouse floor repairs are completed in a day or two. There's no cutting out of old slabs and no waiting days for new slabs to cure*.

Uretek factory & warehouse concrete floor relevelling involves the least interruption to your work!

Uretek work can be done one section at a time or at night or when your factory is closed or at other times to suit your work flow.

In most situations your operations can continue while we're releveling

There's usually no need to move stock or machinery off the floor. No excavation. No mess.

Weight on your concrete floor is no problem:

it's an advantage! Foundations under factory and warehouse floors can be compacted more with greater weight on them!

Are you installing new, heavier machinery? Uretek can increase support after new machinery has been installed!

Trip hazards are eliminated. Forklifts can run smoothly and machines can resume in just 30 minutes.

Warehouse floor and wall repairs are effected by resupporting, raising and releveling. The repairs are quick, economical and carried out with minimal disruption. 

Warehouse shelves and conveyor systems usually return to their correct positions as floors are releveled.

OH & S issues are addressed quickly: We fill voids and rectify ponding, slab movement and trip hazards inside and out.

We relevel parking areas, loading docks, hardstand areas and driveways. Your people, forklifts and machines can operate safely again.

URETEK relevels factory and warehouse concrete floors fast and economically with minimal inconvenience to you.

* If you are concerned that some slabs may be too cracked or  deteriorated, our experienced Project Managers will advise on which sections need to be replaced andwhich can be saved by Uretek.

See also

  1. Parking Areas Relevelled
  2. Driveways Relevelled
  3. Concrete Floor Maintenance
  4. How to repair Wall Cracks

Back to top

Uretek Ground Engineering

Uretek solves many problems by unique and patented systems of resin injection.

Fast, economical, long-lasting, environmental and with minimal disruption.